Quick link navigation:
Access Key s: Jump to Content
Access Key n: Jump to Main Navigation
Access Key m: Jump to Sub Navigation

Emergency Cold Frame Assembly Instructions

Pole A is 2ft, Pole B is 4ft and Pole C is 1ft 4in.

Emergency Cold Frame Assembly diagram
  1. Assemble base as per diagram.
  2. Add uprights.
  3. Assemble top as per diagram.
  4. Fit top to uprights.
  5. Fit cover by sliding evenly over the frame. Do not try to pull cover down one end at a time. Pull the flaps around the base tubes and secure with net clips. There are 3 Clips for each end and 4 for each side.
  6. Finally place cold frame in desired location and secure to ground with pegs, which should be fitted over the protruding plastic lugs on the base.